General
| Project No: | 905456 |
| Quantity: | 1 pc. |
| Manufacturer: | CITIZEN MIYANO |
| Type: | ABX-64THY |
| Control: | Fanuc 31i MA |
| Year of Manufacture: | 2012 |
| Condition: | Used Machine |
| Programme run approx. [h]: | 27.800 |
Description
TURNING
| 12 Axis |
| Max. turning diameter 210 mm |
| Max. turning length 514 mm |
| Max. Clamping chuck diameter 210/169 mm |
| Max. distance between both spindle noses 749 mm |
| Max. speed main spindle 5000 1/min |
| Max. power main spindle at 10-40/100% duty ratio 15/11 kW |
| Max. torque main spindle at 10-40/100% duty ratio 98/133 Nm |
| Spindle bore main spindle 64 mm |
| Spindle flange size main spindle A2-8 |
| Axis at main spindle unit C-Achse |
| Max. speed opposed spindle 5000 1/min |
| Max. power opposed spindle at 10-40/100% duty ratio 7,5/5,5 kW |
| Max. torque opposed spindle at 10-40/100% duty ratio 49/67 Nm |
| Spindle bore opposed spindle 52 mm |
| Spindle flange size opposed spindle A2-8 |
| Axis at opposed spindle unit C-Achse |
| Coolant through main spindle |
| Workpiece pusher in opposed spindle |
Upper turret LH side
| No. of stations/driven 12/12 |
| Speed tool drive 6000 1/min |
| Torque tool drive 40 Nm |
| Axis in turret X1/Y1/Z1 |
| Travel in X/Y/Z 190/80/270 mm |
| Max. rapid traverse in X/Y/Z 16/12/20 m/min |
Upper turret RH side
| No. of stations/driven 12/12 |
| Speed tool drive 6000 1/min |
| Torque tool drive 40 Nm |
| Axis in turret X3/Y3/Z3 |
| Travel in X/Y/Z 190/80/270 mm |
| Max. rapid traverse in X/Y/Z 16/12/20 m/min |
Lower turret LH side
| No. of stations/driven 12/12 |
| Speed tool drive 6000 1/min |
| Torque tool drive 40 Nm |
| Axis in turret X2/Y2/Z2 |
| Travel in X/Y/Z 190/80/545 mm |
| Max. rapid traverse in X/Y/Z 16/12/24 m/min |
FURTHER EQUIPMENT
| Tool measurement by touch sensor |
| Fully enclosed work area |
| Light in working area |
| Preparation for central oil-/emulsion mist extraction unit |
| Slat band chain chip conveyor |
| Machine operates/operated with oil |
| Coolant unit |
| High pressure pump |
| Automatic CO2-fire extinguishing system |
| Part outfeed conveyor |
| Finish-part pick-up unit |
| Bar loader/magazine TOP XF-S-365 |
| Max. bar diameter 65 mm |
| Max. bar length 3000 mm |
| Tapping without compensation chuck |
| Mobile operating device for the setup operation inkl. Electronic handwheel |
| Automatic central lubrication |
| 2 pc. Collet chuck mm |
| 1 Set Tool holder for turning tools |
| 1 Set Tool holder for driven tools (8 pcs. straight, 8 pcs. right angle, 1 pc. adjustable) |
GENERAL TECHNICAL DATA
| Air supply 5 bar |
| Total power requirement 64 kVA |
| Machine dimensions (LxWxH) approx. 3764x2400x2222 mm |
| Machine weight approx. 11380 kg |
Remarks
| Bar loader: New in 2014 Swarf conveyor: New in 2022 . We described the specified product with the upmost attention. As this product is not manufactured by us, the mentioned data and description can deviate. Herewith, we point out that they are non-binding and ask you to check them during your inspection. |