General
| Project No: | 905594 |
| Quantity: | 1 pc. |
| Manufacturer: | DMG MORI |
| Type: | CTX beta 1250 TC 4A |
| Control: | Siemens 840 D solutionline |
| Year of Manufacture: | 2016 |
| Condition: | Used Machine |
| Machine on approx. [h]: | 10.660 |
| Spindle on approx. [h]: | 4.362 |
Description
MILLING
| 5 Axis, simultaneous |
| Travel in Y 200 mm |
| Linear glass scales X1/X2/Y/Z1/Z2/Z3 |
| Tool taper HSK A63 |
| Max. speed milling spindle 18000 1/min |
| Max. power at 10-40/100% duty ratio 22 kW |
| Max. torque at 10-40/100% duty ratio 100 Nm |
| Milling head NC-controlled swivel-type +/- 110 degree |
| Chain-type tool magazine 80 stations |
| Max. tool diameter 80 mm |
| Max. tool diameter without adjacent tools 120 mm |
| Max. tool length 300 mm |
| Max. workpiece weight 5 kg |
TURNING
| Max. turning diameter 500 mm |
| Max. turning length 1250 mm |
| Max. speed main spindle 5000 1/min |
| Max. power main spindle at 10-40/100% duty ratio 32/25 kW |
| Max. torque main spindle at 10-40/100% duty ratio 360/280 Nm |
| Spindle bore main spindle 77 mm |
| Spindle diameter in front bearing main spindle 130 mm |
| Spindle flange size main spindle 170h5 |
| Axis at main spindle unit C |
| Hollow clamping cylinder at main spindle |
| Max. speed opposed spindle 5000 1/min |
| Max. power opposed spindle at 10-40/100% duty ratio 32/25 kW |
| Axis at opposed spindle unit C/Z |
| Partial hollow clamping cylinder at opposed spindle |
| Coolant through main spindle |
| Tailstock-function for opposed spindle |
| Steady rest for turret |
| pc. Lower turret |
| No. of stations/driven 12/12 |
| Tool reception in turret VDI 40 |
| Speed tool drive 4000 1/min |
| Torque tool drive 7 Nm |
FURTHER EQUIPMENT
| IR-measuring probe |
| Fully enclosed work area |
| Automatic working range sliding door |
| Light in working area |
| Oil-/emulsion mist extraction unit |
| Slat band chain chip conveyor |
| Flush gun |
| Coolant unit with paperband filter |
| High pressure pump 80 bar |
| Part outfeed conveyor |
| Finish-part pick-up unit |
| Bar loader/magazine (NOT USED!) |
| Max. bar diameter 65 mm |
| Max. bar length 1600 mm |
| Interface for bar loader/magazine |
| Siemens Shopturn |
ACCESSORIES
| 2 pc. 3-jaw clamping chuck 260 mm |
GENERAL TECHNICAL DATA
| Total power requirement 70 kVA |
| Machine dimensions (LxWxH) approx. 4000x2500x2500 mm |
| Machine weight approx. 8000 kg |
Remarks
| We described the specified product with the upmost attention. As this product is not manufactured by us, the mentioned data and description can deviate. Herewith, we point out that they are non-binding and ask you to check them during your inspection. |