General
| Project No: | 905306 |
| Quantity: | 1 pc. |
| Manufacturer: | EMAG |
| Type: | VSC 250 DS |
| Control: | Siemens 840 D solutionline |
| Year of Manufacture: | 2015 |
| Condition: | Used Machine |
| Machine on approx. [h]: | 33.891 |
| Programme run approx. [h]: | 21.400 |
Description
TURNING
| Max. Swing diameter over bed cover 260 mm |
| Max. Clamping chuck diameter 200/250 mm |
| Max. speed main spindle 3500 1/min |
| Max. power main spindle at 10-40/100% duty ratio 39/28 kW |
| Max. torque main spindle at 10-40/100% duty ratio 460 Nm |
| Spindle diameter in front bearing main spindle 100 mm |
| Spindle flange size main spindle Gr. 6 |
| Axis at main spindle unit X/Z |
| Travel in X/Y/Z main spindle unit 680/0/200 mm |
| Max. rapid traverse in X/Y/Z main spindle unit 45/0/30 m/min |
| Feed force X/Y/Z main spindle unit 5500/0/11000 N |
| Linear glass scales main spindle unit |
| Programmable clamping pressure in main spindle |
| Solid clamping cylinder at main spindle |
| Coolant through main spindle |
| Air-monitored clamping of workpiece |
Lower turret
| No. of stations/driven 12/0 |
| Tool reception in turret VDI 40 |
Cylindrical grinding
| Motor spindle (grinding) |
| Max. speed 45000 1/min |
| Max. power at 10-40/100 duty ratio 18 kW |
| Diamond dressing ring under clamping chuck on truning spindle |
FURTHER EQUIPMENT
| Measuring probe |
| Tool life time monitoring with sister tool managment |
| Touch sensor |
| Fully enclosed work area |
| Light in working area |
| Oil-/emulsion mist extraction unit |
| Slat band chain chip conveyor |
| Flush gun |
| Coolant unit with paperband filter |
| Cooling system for coolant |
| High pressure pump 15 bar |
| Shuttel for in-/outfeed of blanks/finished parts |
| Gantry loader |
| Interface for gantry loader or robot |
| Modem for remote diagnosis and TeleService |
| Warning lamp |
| Automatic central oil lubrication |
ACCESSORIES
| 1 pc. SMW Diaphragm clamping chuck |
| 1 Set Tool holder for turning tools |
GENERAL TECHNICAL DATA
| Air supply 6 bar |
| Mains fuse 100 A |
| Total power requirement 45 kVA |
| Machine dimensions (LxWxH) approx. 3200x1900x2650 mm |
| Machine weight approx. 8000 kg |
Remarks
| The machine is in excellent condition. It is quipped with a 12-station turret for non-driven tools as well as with a vertical grinding spindle situated in the working area behind the turret. Right now, a gear is hard-turned on both plane faces and the inner diameter without coolant. After that, the inner diameter will be finished by grinding with coolant. The inner diameter is checked by means of a pneumatic measuring system outside of the machine. The part will be placed onto the automatic pallet storage system afterwards. No-good-parts and SPC-parts can be fed-out on separate chutes. . We described the specified product with the upmost attention. As this product is not manufactured by us, the mentioned data and description can deviate. Herewith, we point out that they are non-binding and ask you to check them during your inspection. |