General
| Project No: | 905475 |
| Quantity: | 1 pc. |
| Manufacturer: | GILDEMEISTER |
| Type: | GMX 250 linear |
| Control: | Siemens 840 D powerline |
| Year of Manufacture: | 2006 |
| Condition: | Used Machine |
| Machine on approx. [h]: | 70.121 |
| Programme run approx. [h]: | 37.657 |
Description
MILLING
| Travel in X 550 mm |
| Travel in Y 180 mm |
| Travel in Z 1185 mm |
| Max. rapid traverse in X/Y/Z 40/24/70 m/min |
| Feed force X/Y/Z 7,5/11/7,5 kN |
| Tool taper HSK 63 A |
| Max. speed milling spindle 12000 1/min |
| Max. power at 10-40/100% duty ratio 22/13,2 kW |
| Max. torque at 10-40/100% duty ratio 100/60 Nm |
| Milling head NC-controlled swivel-type |
| Rack-type tool magazine 80 stations |
| Max. tool diameter 80 mm |
| Max. tool diameter without adjacent tools 120 mm |
| Max. tool length 300 mm |
| Max. workpiece weight 5/8 kg |
TURNING
| Max. turning diameter 640 mm |
| Max. turning length 1185 mm |
| Max. Swing diameter over bed cover 640 mm |
| Max. Clamping chuck diameter 250 mm |
| Max. speed main spindle 5000 1/min |
| Max. power main spindle at 10-40/100% duty ratio 28/21 kW |
| Max. torque main spindle at 10-40/100% duty ratio 320/240 Nm |
| Spindle bore main spindle 65 mm |
| Spindle diameter in front bearing main spindle 120 mm |
| Spindle flange size main spindle 170h5 |
| Axis at main spindle unit C |
| Linear glass scales in all linear axis’ |
| Hollow clamping cylinder at main spindle |
| Max. speed opposed spindle 5000 1/min |
| Max. power opposed spindle at 10-40/100% duty ratio 28/21 kW |
| Spindle bore opposed spindle 65 mm |
| Spindle diameter in front bearing opposed spindle 120 mm |
| Axis at opposed spindle unit C/Z3 |
| Partial hollow clamping cylinder at opposed spindle |
Lower turret LH side
| No. of stations/driven 12/12 |
| Tool reception in turret CDI 80 auf Capto C5 |
| Speed tool drive 4000 1/min |
| Torque tool drive 28 Nm |
| Axis in turret X2/Z2 |
| Travel in X2/Z2 180/1050 mm |
| Max. rapid traverse in X/Z 24/36 m/min |
| Feed force X/Z 9000/11000 Nm |
FURTHER EQUIPMENT
| IR-measuring probe |
| Tool breakage control by wire |
| Tool breakage monitoring by ARTIS |
| Fully enclosed work area |
| Automatic working range sliding door |
| Rotating disc window |
| Light in working area |
| Chip conveyor |
| Flush gun |
| Coolant unit KNOLL SF 1000 turbo |
| Temperature controlled coolant |
| High pressure pump 8/20/80 bar |
| Part outfeed conveyor |
| Finish-part pick-up unit |
| Bar loader/magazine IRCO SiMag 70.1-R |
| Max. bar diameter 65 mm |
| Max. bar length 3200 mm |
| Ethernet interface |
| Warning lamp |
GENERAL TECHNICAL DATA
| Total power requirement 75 kVA |
| Machine dimensions (LxWxH) approx. 7800x4100x3040 mm |
| Machine weight approx. 15000 kg |
Remarks
| We described the specified product with the upmost attention. As this product is not manufactured by us, the mentioned data and description can deviate. Herewith, we point out that they are non-binding and ask you to check them during your inspection. |