General
| Project No: | 905474 |
| Quantity: | 1 pc. |
| Manufacturer: | GILDEMEISTER |
| Type: | GMX 300 linear |
| Control: | Siemens 840 D powerline |
| Year of Manufacture: | 2006 |
| Condition: | Used Machine |
| Machine on approx. [h]: | 80.448 |
| Programme run approx. [h]: | 37.938 |
Description
MILLING
| Travel in X 550 mm |
| Travel in Y 220 mm |
| Travel in Z 1585 mm |
| Tool taper HSK 63 A |
| Max. speed milling spindle 12000 1/min |
| Max. power at 10-40/100% duty ratio 22 kW |
| Max. torque at 10-40/100% duty ratio 100 Nm |
| Milling head NC-controlled swivel-type |
| Rack-type tool magazine 120 stations |
TURNING
| Max. turning diameter 500 mm |
| Max. turning length 1585 mm |
| Max. Swing diameter over bed cover 640 mm |
| Max. Clamping chuck diameter 250 mm |
| Max. speed main spindle 4000 1/min |
| Max. power main spindle at 10-40/100% duty ratio 37/25 kW |
| Spindle bore main spindle 66 mm |
| Axis at main spindle unit C |
| Linear glass scales in all linear axis’ |
| Partial hollow clamping cylinder at main spindle |
| Max. speed opposed spindle 4000 1/min |
| Max. power opposed spindle at 10-40/100% duty ratio 37/25 kW |
| Spindle bore opposed spindle 66 mm |
| Axis at opposed spindle unit C/Z3 |
| Travel in Z3 opposed spindle unit 1500 mm |
| Partial hollow clamping cylinder at opposed spindle |
Lower turret LH side
| No. of stations/driven 12/12 |
| Tool reception in turret CDI 80 auf Capto C5 |
| Speed tool drive 4000 1/min |
| Torque tool drive 32 Nm |
| Axis in turret X2/Z2 |
| Travel in X2/Z2 225/1400 mm |
FURTHER EQUIPMENT
| IR-measuring probe |
| Tool breakage control by wire |
| Tool breakage monitoring by ARTIS |
| Fully enclosed work area |
| Automatic working range sliding door |
| Rotating disc window |
| Light in working area |
| Oil-/emulsion mist extraction unit |
| Chip conveyor |
| Discharge hight chip conveyor 1100 mm |
| Flush gun |
| Coolant unit KNOLL SF 1000 turbo |
| Temperature controlled coolant |
| High pressure pump 8/20/80 bar |
| Ethernet interface |
| Warning lamp |
Remarks
| We described the specified product with the upmost attention. As this product is not manufactured by us, the mentioned data and description can deviate. Herewith, we point out that they are non-binding and ask you to check them during your inspection. |