General
| Project No: | 905487 |
| Quantity: | 1 pc. |
| Manufacturer: | INDEX |
| Type: | C 65 |
| Control: | Siemens 840 D |
| Year of Manufacture: | 2006 |
| Condition: | Used Machine |
| Spindle on approx. [h]: | 45.900 |
Description
TURNING
| Max. speed main spindle 5000 1/min |
| Max. power main spindle at 10-40/100% duty ratio 27/20 kW |
| Max. torque main spindle at 10-40/100% duty ratio 145/105 Nm |
| Spindle bore main spindle 66 mm |
| Spindle diameter in front bearing main spindle 110 mm |
| Spindle flange size main spindle 140 mm |
| Axis at main spindle unit C |
| Adjustable clamping pressure in main spindle 8-80 bar |
| Hollow clamping cylinder at main spindle |
| Max. speed opposed spindle 5000 1/min |
| Max. power opposed spindle at 10-40/100% duty ratio 27/20 kW |
| Max. torque opposed spindle at 10-40/100% duty ratio 145/105 Nm |
| Spindle bore opposed spindle 66 mm |
| Spindle diameter in front bearing opposed spindle 110 mm |
| Spindle flange size opposed spindle 140 mm |
| Axis at opposed spindle unit X/Z/C |
| Travel in X/Y/Z opposed spindle unit 150/-/600 mm |
| Max. rapid traverse in X/Y/Z opposed spindle unit 25/-/45 m/min |
| Max. acceleration in X/Y/Z opposed spindle unit 4/-/5 m/s2 |
| Feed force X/Y/Z opposed spindle unit 5000/-/5000 N |
| Linear glass scales opposed spindle unit |
| Adjustable clamping pressure in opposed spindle 8-80 bar |
| Hollow clamping cylinder at opposed spindle |
| Stop in opposed spindle |
| Coolant through main spindle |
Upper turret
| No. of stations/driven 12/12 |
| Tool reception in turret VDI 25 |
| Speed tool drive 6000 1/min |
| Torque tool drive 16/8 Nm |
| Axis in turret X/Y/Z |
| Travel in X/Y/Z 110/70/360 mm |
| Max. rapid traverse in X/Y/Z 25/12/45 m/min |
| Max. acceleration in X/Y/Z 4/5/10 m/s2 |
| Feed force X/Y/Z 5000/4000/5000 Nm |
| Linear glass scales |
Lower turret with turret disc LH and RH side
| No. of stations/driven 2x 12/12 |
| Tool reception in turret VDI 25 |
| Speed tool drive 6000 1/min |
| Torque tool drive 16/8 Nm |
| Axis in turret X/Y/Z |
| Travel in X/Y/Z 110/70/360 mm |
| Max. rapid traverse in X/Y/Z 25/12/45 m/min |
| Max. acceleration in X/Y/Z 4/5/10 m/s2 |
| Feed force X/Y/Z 5000/4000/5000 Nm |
FURTHER EQUIPMENT
| Fully enclosed work area |
| Light in working area |
| Preparation for central oil-/emulsion mist extraction unit |
| Slat band chain chip conveyor |
| Machine operates/operated with oil |
| Internal coolant supply 80 bar |
| Coolant unit with paperband filter |
| Temperature controlled coolant |
| High pressure pump 8/20/80 bar |
| Automatic CO2-fire extinguishing system |
| Part outfeed conveyor |
| Finish-part pick-up unit |
| Bar loader/magazine MBL 65/3700 |
| Max. bar diameter 65 mm |
| Max. bar length 3700 mm |
| Modem for remote diagnosis and TeleService |
| Transmit/Tracyl function |
| Electronic shaft for spindles and drives |
| Warning lamp |
GENERAL TECHNICAL DATA
| Space requirement of the whole equipement (LxWxH) approx. 6000x1700x1800 mm |
| Machine weight approx. 6700 kg |
Remarks
| We described the specified product with the upmost attention. As this product is not manufactured by us, the mentioned data and description can deviate. Herewith, we point out that they are non-binding and ask you to check them during your inspection. |