General
Project No: | 905600 |
Quantity: | 1 pc. |
Manufacturer: | STUDER |
Type: | S 40 CNC |
Control: | Fanuc 16i TB |
Year of Manufacture: | 2008 |
Condition: | Used Machine |
Machine on approx. [h]: | 66.041 |
Spindle on approx. [h]: | 20.282 |
Description
Cylindrical grinding
Centre hight 175 mm |
Centre distance 1000 mm |
Travel in X/Z 275/- mm |
Max. rapid traverse in X/Z 5/- m/min |
Grinding head automatic swivel-type |
Belt-driven grinding spindle for external grinding wheel |
RH with max. diameter x width x bore 500×63 mm |
Max. circumferential speed 50 m/s2 |
Max. power at 10-40/100 duty ratio 7,5 kW |
2. Belt-driven grinding spindle for external grinding wheel |
LH with max. diameter x width x bore 400×63 mm |
Max. circumferential speed 50 m/s2 |
Max. power at 10-40/100 duty ratio 7,5 kW |
Reception for internal grinding spindle |
Max. power main drive at 10-40/100% duty ratio 15 kW |
Automatic balancing unit |
Linear glass scales X/Z |
Max. speed internal grinding spindle 24000-42000 1/min |
Max. speed 1000 1/min |
Reception 110 mm |
C-axis |
Workhead basis with fine-adjustement |
Tailstock |
Cylinder fine adjustment tailstock manual |
Swivel range workpiece table 8,5 degrees |
Travel in Z 1050 mm |
Max. rapid feed in Z 10 m/min |
Dressing device with dressing plates on workhead |
Dressing device with dressing plates on tailstock |
FURTHER EQUIPMENT
MARPOSS In-process measuring system |
1 pc. Diameter measuring head |
Measuring probe for longitudinal positioning |
Touch sensor |
Fully enclosed work area |
Automatic working range sliding door |
Light in working area |
Mechanical oil-/emulsion mist extraction unit |
Coolant unit with paperband filter magnetic separator |
Part infeed conveyor |
Part outfeed conveyor |
Internal gantry-type loading-/unloading unit |
Mobile operating device for the setup operation |
Warning lamp |
Outside mounted cabinet cooler |
ACCESSORIES
1 set Grinding wheel flange |
GENERAL TECHNICAL DATA
Remarks
The machine will be sold with or without the Felsomat loader. Due to the regular yearly inspection by Studer, the machine is in a very good condition. . We described the specified product with the upmost attention. As this product is not manufactured by us, the mentioned data and description can deviate. Herewith, we point out that they are non-binding and ask you to check them during your inspection. |