General
Project No: | 905217 |
Quantity: | 1 pc. |
Manufacturer: | TRAUB |
Type: | TNL 18-9P |
Control: | Traub TX 8i-p |
Year of Manufacture: | 2016 |
Condition: | Used Machine |
Machine on approx. [h]: | 16.320 |
Description
TURNING
9 Axis |
Max. turning diameter 20 mm |
Max. speed main spindle 10000 1/min |
Max. power main spindle at 10-40/100% duty ratio 3,7/2,2 kW |
Max. torque main spindle at 10-40/100% duty ratio 23,5/14 Nm |
Spindle bore main spindle 20 mm |
Axis at main spindle unit C |
Linear glass scales in all X-axis |
Hollow clamping cylinder at main spindle |
Max. speed opposed spindle 10000 1/min |
Max. power opposed spindle at 10-40/100% duty ratio 3,7/2,2 kW |
Max. torque opposed spindle at 10-40/100% duty ratio 23,5/14 Nm |
Spindle bore opposed spindle 20 mm |
Axis at opposed spindle unit X/Z/C |
Travel in X/Y/Z opposed spindle unit 100/-/262 mm |
Max. rapid traverse in X/Y/Z opposed spindle unit 20/-/40 m/min |
Hollow clamping cylinder at opposed spindle |
Coolant through main spindle |
Upper turret
No. of stations/driven 8/8 |
Tool reception in turret 45 mm |
Speed tool drive 12000 1/min |
Axis in turret X/Y/Z/H |
Travel in X/Y/Z swiss- resp. short turning 120/65/250 mm |
Max. rapid traverse in X/Y/Z 20/20/40 m/min |
Lower turret
No. of stations/driven 8/8 |
Tool reception in turret 45 mm |
Speed tool drive 12000 1/min |
Axis in turret X/Y/Z/H |
Travel in X/Y/Z swiss- resp. short turning 120/60/250 mm |
Max. rapid traverse in X/Y/Z 20/20/40 m/min |
Part gripper in lower turret |
FURTHER EQUIPMENT
Tool monitoring |
Fully enclosed work area |
Light in working area |
Preparation for central oil-/emulsion mist extraction unit |
Slat band chain chip conveyor |
Discharge hight chip conveyor 1000 mm |
High pressure pump 3/8/20 bar |
Preparation for CO2-fire extinguishing system |
Bar loader/magazine, make Stamag FMB 20-3200 |
ACCESSORIES
Diverse clamping chucks |
1 Set Tool holder for turning tools |
1 Set Tool holder for driven tools |
GENERAL TECHNICAL DATA
Total power requirement 24 kVA |
Machine dimensions (LxWxH) approx. 3060 x 1460 x 2250 mm |
Machine weight approx. 4000 kg |
Remarks
CNC-lathe for swiss-type and short turning mode . We described the specified product with the upmost attention. As this product is not manufactured by us, the mentioned data and description can deviate. Herewith, we point out that they are non-binding and ask you to check them during your inspection. |