General
| Project No: | 905261 |
| Quantity: | 1 pc. |
| Manufacturer: | TRAUB |
| Type: | TNL 32/9 |
| Control: | Traub TX 8i-s |
| Year of Manufacture: | 2013 |
| Condition: | Used Machine |
| Machine on approx. [h]: | 30.771 |
| Programme run approx. [h]: | 27.643 |
| Spindle on approx. [h]: | 26.416 |
Description
TURNING
| 9 Axis |
| Max. turning diameter 32 mm |
| Max. turning length 700 mm |
| pc. Main spindle with driven guiding bush |
| Max. speed main spindle 6400 1/min |
| Max. power main spindle at 10-40/100% duty ratio 5,5/3,7 kW |
| Max. torque main spindle at 10-40/100% duty ratio 43,7/29,4 Nm |
| Spindle bore main spindle 32 mm |
| Axis at main spindle unit C |
| Headstock stroke main spindle (sliding-head/fixed head) 305/127 mm |
| Linear glass scales in all X-axis |
| Hollow clamping cylinder at main spindle |
| Max. speed opposed spindle 6400 1/min |
| Max. power opposed spindle at 10-40/100% duty ratio 5,5/3,7 kW |
| Max. torque opposed spindle at 10-40/100% duty ratio 43,7/29,4 Nm |
| Spindle bore opposed spindle 32 mm |
| Axis at opposed spindle unit X/Z/C |
| Multi clamping pressure in opposed spindle |
| Hollow clamping cylinder at opposed spindle |
| Workpiece discharge unit in opposed spindle |
Upper turret
| No. of stations/driven 10/10 |
| Speed tool drive 12000 1/min |
| Axis in turret X/Y/Z/H |
| Travel in X/Y/Z swiss- resp. short turning 140/-25 bis +40/320 mm |
Lower turret
| No. of stations/driven 10/10 |
| Speed tool drive 12000 1/min |
| Axis in turret X/Y/Z/H |
| Travel in X/Y/Z swiss- resp. short turning 140/-25 bis +40/320 mm |
| Part gripper in lower turret |
FURTHER EQUIPMENT
| Tool breakage monitoring |
| Fully enclosed work area |
| Light in working area |
| Electrostatic oil-/emulsion mist extraction unit |
| Slat band chain chip conveyor |
| Discharge hight chip conveyor 1000 mm |
| Machine operates/operated with oil |
| Coolant unit with vacuum rotation filter |
| Cooling system for coolant |
| High pressure pump 3/8/20 bar |
| Automatic CO2-fire extinguishing system |
| Bar loader/magazine, make FMB LSK 38-4200 „C” |
GENERAL TECHNICAL DATA
| Total power requirement 28 kVA |
| Machine weight approx. 7350 kg |
Remarks
| CNC-lathe for swiss-type and short turning mode . We described the specified product with the upmost attention. As this product is not manufactured by us, the mentioned data and description can deviate. Herewith, we point out that they are non-binding and ask you to check them during your inspection. |