General
Project No: | 905682 |
Quantity: | 1 pc. |
Manufacturer: | WILLEMIN MACODEL |
Type: | W508MT |
Control: | Fanuc 31i MA 5 |
Year of Manufacture: | 2013 |
Condition: | Used Machine |
Programme run approx. [h]: | 21.478 |
Description
MILLING
Travel in X 400 mm |
Travel in Y 200 mm |
Travel in Z 425 mm |
Max. rapid traverse in X/Y/Z 40/40/40 m/min |
Feed force X/Y/Z 2500/2500/2500 N |
Linear glass scales X/Y/Z |
Tool taper HSK-E40 |
Max. speed milling spindle 50-30000 1/min |
Max. power at 10-40/100% duty ratio 15/10 kW |
Max. torque at 10-40/100% duty ratio 12/8 Nm |
Milling head NC-controlled swivel-type -15/+100 |
Tool magazine 72 stations |
Max. tool diameter 50 mm |
Max. tool diameter without adjacent tools 80 mm |
Max. tool length (Plate 1/2/3) 100/100/130 mm |
Max. workpiece weight 1 kg |
Tool change time 0,8 s |
Chip-to-chip time 3 s |
Milling-turning spindle NC-controlled (A axis) |
TURNING
Max. turning diameter 42 mm |
Max. speed main spindle (Milling/Turning Mode) 300/6000 1/min |
Max. power main spindle at 10-40/100% duty ratio (Milling/Turning Mode) -/7,5 kW |
Max. torque main spindle at 10-40/100% duty ratio (Milling/Turning Mode) 71,6/- Nm |
Spindle bore main spindle 42 mm |
Hollow clamping cylinder at main spindle |
pc. Opposed spindle on turreet |
Max. speed opposed spindle (Milling/Turning Mode) 300/6000 1/min |
Max. power opposed spindle at 10-40/100% duty ratio (Turning Mode) 5/3,7 kW |
Max. torque opposed spindle at 10-40/100% duty ratio (Milling Mode) 24/16 Nm |
Turret
Stations |
Station 1: Clamping vice for workpiece |
Station 2: Opposing spindle 1/min |
FURTHER EQUIPMENT
IR-Contact tool-measuring probe |
IR-Measuring probe |
Fully enclosed work area |
Light in working area |
Chip conveyor |
Machine operates/operated with oil |
Internal coolant supply |
Coolant unit |
High pressure pump 20/80 bar |
Automatic CO2-fire extinguishing system |
Internal gantry-type loading-/unloading unit |
Bar loader/magazine LNS Hydrobar HYS 6.42 HS – 4.2 with 6 guiding tubes star-type |
Max. bar diameter 6-42 mm |
Max. bar length 3100 mm |
Warning lamp |
Automatic central lubrication |
GENERAL TECHNICAL DATA
Air supply 6 bar |
Mains fuse 50 A |
Total power requirement 35 kVA |
Machine weight approx. 2500 kg |
Remarks
We described the specified product with the upmost attention. As this product is not manufactured by us, the mentioned data and description can deviate. Herewith, we point out that they are non-binding and ask you to check them during your inspection. |