Description
TURNING
| Max. Swing diameter over bed cover | 210 mm |
| Max. Clamping chuck diameter | 170 mm |
| Max. speed main spindle | 7500 1/min |
| Max. power main spindle at 10-40/100% duty ratio | 25/16 kW |
| Max. torque main spindle at 10-40/100% duty ratio | 134/85 Nm |
| Spindle diameter in front bearing main spindle | 80 mm |
| Spindle flange size main spindle | Gr. 5 (DIN 55026) |
| Axis at main spindle unit | X/Z |
| Travel in X/Y/Z main spindle unit | 400/-/200 mm |
| Max. rapid traverse in X/Y/Z main spindle unit | 60/-/30 m/min |
| Feed force X/Y/Z main spindle unit | 5000/-/5000 N |
| Linear glass scales main spindle unit | X/Z |
| Solid clamping cylinder at main spindle |
Lower turret
| No. of stations/driven | 12/12 |
| Tool reception in turret | VDI 40 |
| Speed tool drive | 6000 1/min |
FURTHER EQUIPMENT
| Fully enclosed work area | |
| Light in working area | |
| Oil-/emulsion mist extraction unit | |
| Slat band chain chip conveyor | |
| Discharge hight chip conveyor | 1250 mm |
| Coolant unit 80 l/min at | 7 bar |
| Loop-type part storage conveyor | |
| Max. workpiece diameter (27 workpieces with 30-85 mm or 18 workpieces with 30-130 mm) | mm |
| Max. workpiece length | 100 mm |
| Automatic central oil lubrication |
GENERAL TECHNICAL DATA
| Operating voltage | 400/50 V/Hz |
| Total power requirement | 28 kVA |
| Machine dimensions (LxWxH) approx. | 2500x1900x2300 mm |
| Space requirement of the whole equipement (LxWxH) approx. | 3600x1900x2300 mm |
| Machine weight approx. | 5500 kg |
Remarks
| We offer a professionally retrofitted machine. All crucial components, like guideways with roller carriages, ball screws, main spindle, bearings in turret and tool drive etc. have been replaced. Please also see attached document. We described the specified product with the upmost attention. As this product is not manufactured by us, the mentioned data and description can deviate. Herewith, we point out that they are non-binding and ask you to check them during your inspection. |
