Description
MILLING
| Travel in X | 1330/620 (2000) mm |
| Travel in Y | 650/385 mm |
| Travel in Z | 520 mm |
| Max. cutting feed in X/Y/Z | 45/45/45 m/min |
| Linear glass scales | X/Y/Z/A/C |
| Tool taper | SK 40 |
| Max. speed milling spindle | 12000 1/min |
| Max. power at 10-40/100% duty ratio | 22 kW |
| Max. torque at 10-40/100% duty ratio | 111 Nm |
| Chain-type tool magazine | 56 stations |
| Max. tool diameter | 80 mm |
| Max. tool diameter without adjacent tools | 100 mm |
| Max. tool length | 330 mm |
| Max. workpiece weight | 8,5 kg |
| Chip-to-chip time | 6,5 s |
| Machine table with 6/4 plan levelled integrated Garant Zeroclamp clamping points | |
| Swivel rotary table | |
| Swivel unit NC-controlled | |
| Swivel unit with counter bearing | |
| Swivel range | +10 bis -100 degree |
| Rotary table NC-controlled | |
| Diameter rotary table | 520x420 mm |
FURTHER EQUIPMENT
| IR-measuring probe | |
| Fully enclosed work area | |
| Light in working area | |
| Centre partition for pendulum work | |
| Electrostatic oil-/emulsion mist extraction unit | |
| Slat band chain chip conveyor | |
| Machine operates/operated with emulsion | |
| Internal coolant supply | |
| Flush gun | |
| Coolant unit with paperband filter | |
| High pressure pump | 50 bar |
| Mobile operating device for the setup operation inkl. Electronic handwheel | |
| Automatic central grease lubrication |
GENERAL TECHNICAL DATA
| Machine weight approx. | 11000 kg |
Remarks
| We described the specified product with the upmost attention. As this product is not manufactured by us, the mentioned data and description can deviate. Herewith, we point out that they are non-binding and ask you to check them during your inspection. |
