SW Schwäbische Werkzeugmaschinen
BA 600-2
Double-spindle Machining Centre
General
| Project No.: | 905771 |
| Quantity: | 1 pc. |
| Manufacturer: | SW Schwäbische Werkzeugmaschinen |
| Type: | BA 600-2 |
| Control: | Siemens 840 D |
| New in: | 2008 |
| Condition: | Used Machine |
| Spindle on approx. (hrs): | 9320 |
| Shifts Maschine on approx. (hrs): | 2-3 shift |
Description
MILLING
| Axis | 4/5 |
| Travel in X | 600 mm |
| Travel in Y | 600 (975) mm |
| Travel in Z | 500 mm |
| Max. rapid traverse in X/Y/Z | 45/45/45 m/min |
| Max. acceleration in X/Y/Z | 2,5/2,5/2,5 m/s2 |
| Feed force X/Y/Z | 15000/15000/15000 N |
| Tool taper | HSK-A100 |
| Max. speed milling spindle | 10000 1/min |
| Max. power at 10-40/100% duty ratio | 2x38 kW |
| Max. torque at 10-40/100% duty ratio | 2x363 Nm |
| Spindle diameter in front bearing | 100 mm |
| 2 pc. Horizontal milling spindle/-s | |
| Spindle distance | 600 mm |
| Chain-type tool magazine | 2x40 stations |
| Max. tool diameter | 100 mm |
| Max. tool diameter without adjacent tools | 250 mm |
| Max. tool length | 350 mm |
| Max. workpiece weight | 20 kg |
| Chip-to-chip time | 4,9 s |
| Automatic workpiece changer | 2 fold |
| 2 pcs. Swivel unit for clamping bridge | |
| Swivel unit NC-controlled | |
| 2 pcs. Rotary table NC-controlled on one clamping bridge | |
| Diameter rotary table | 340 mm |
| Clamping bridge supports | |
| Hydraulic clamping | 250 bar |
| 6 pc. Additional clamping circuit/-s | |
| Air-monitored clamping of workpiece |
FURTHER EQUIPMENT
| Tool breakage monitoring by Toolinspect | |
| Fully enclosed work area | |
| Automatic working range sliding door | |
| Light in working area | |
| Preparation for central oil-/emulsion mist extraction unit | |
| Chip conveyor | |
| Machine operates/operated with emulsion | |
| Coolant unit | |
| High pressure pump | 70 bar |
| Additionalcontrol panel for tool management | |
| Warning lamp | |
| Automatic central oil lubrication |
GENERAL TECHNICAL DATA
| Operating voltage | 3x400/50 V/Hz |
| Space requirement of the whole equipement (LxWxH) approx. | 5150x8650x4200 mm |
| Machine weight approx. | 20000 kg |
Remarks
| We described the specified product with the upmost attention. As this product is not manufactured by us, the mentioned data and description can deviate. Herewith, we point out that they are non-binding and ask you to check them during your inspection. |
