| Travel in X | 400 mm |
| Travel in Y | 500 (775) mm |
| Travel in Z | 425 mm |
| Max. rapid traverse in X/Y/Z | 100/100/100 m/min |
| Max. acceleration in X/Y/Z | 14/14/20 m/s2 |
| Feed force X/Y/Z | 10000/10000/2x5000 N |
| Linear glass scales | X/Y/Z/A(U)/C1(C2)/W1(W2) |
| Linear drive | X/Y/Z |
| Tool taper | HSK-A 63 |
| Max. speed milling spindle | 17500 1/min |
| Max. power at 10-40/100% duty ratio | 35/26 kW |
| Max. torque at 10-40/100% duty ratio | 80/60 Nm |
| Spindle diameter in front bearing | 80 mm |
| 2 pc. Horizontal milling spindle | |
| Spindle distance | 400 mm |
| Air-monitored tool clamping | |
| Pneumatic tool taper cleaning in milling spindle | |
| Torque support for multi spindle drilling heads | |
| Chain-type tool magazine | 2x36 stations |
| Max. tool diameter | 80 mm |
| Max. tool diameter without adjacent tools | 160 mm |
| Max. tool length | 300 mm |
| Max. workpiece weight | 10 kg |
| Chip-to-chip time | 2,75 s |
| Pallet changer | 2 fold |
| Max. workpiece weight per pallet | 450 kg |
| 2 pc. Swivel unit for clamping bridge | |
| Swivel unit NC-controlled | |
| 4 pcs. Rotary table NC-controlled (5th axis) - 2 pcs. per swivel unit | |
| Bridge dimensions | 1030 mm |
| Workpiece swing diameter | 550 mm |
| 2Clamping bridge supports | |
| Hydraulic clamping | 250 bar |
| 4 pcs. Additional clamping circuit | |
| Air-monitored clamping of workpiece | |
