Description
TURNING
| Max. turning diameter | 20 mm |
| Max. speed main spindle | 10000 1/min |
| Max. power main spindle at 10-40/100% duty ratio | 3,7/2,2 kW |
| Max. torque main spindle at 10-40/100% duty ratio | 23,5/14 Nm |
| Spindle bore main spindle | 20 mm |
| Axis at main spindle unit | Z/C |
| Headstock stroke main spindle | 205 mm |
| Max. rapid traverse in X/Y/Z main spindle unit | -/-/40 m/min |
| Hollow clamping cylinder at main spindle | |
| Max. speed opposed spindle | 10000 1/min |
| Max. power opposed spindle at 10-40/100% duty ratio | 3,7/2,2 kW |
| Max. torque opposed spindle at 10-40/100% duty ratio | 23,5/14 Nm |
| Spindle bore opposed spindle | 20 mm |
| Axis at opposed spindle unit | X/Z/C |
| Travel in X/Y/Z opposed spindle unit | 100/-/262 mm |
| Max. rapid traverse in X/Y/Z opposed spindle unit | 20/-/40 m/min |
Upper turret
| No. of stations/driven | 8/8 |
| Tool reception in turret | 45 mm |
| Speed tool drive | 12000 1/min |
| Axis in turret | X/Y/Z/H |
| Travel in X/Y/Z | 120/-40 bis +25/250 mm |
| Max. rapid traverse in X/Y/Z | 20/20/40 m/min |
Lower turret
| No. of stations/driven | 8/8 |
| Tool reception in turret | 45 mm |
| Speed tool drive | 12000 1/min |
| Axis in turret | X/Y/Z/H |
| Travel in X/Y/Z | 120/-20 bis +40/250 mm |
| Max. rapid traverse in X/Y/Z | 20/20/40 m/min |
FURTHER EQUIPMENT
| Fully enclosed work area | |
| Light in working area | |
| Oil-/emulsion mist extraction unit | |
| Slat band chain chip conveyor | |
| Machine operates/operated with oil | |
| Coolant unit with paperband filter | |
| High pressure pump | 50 bar |
| Automatic CO2-fire extinguishing system | |
| Part outfeed conveyor | |
| Finish-part pick-up unit |
Bar loader/magazine make FMB minimag 20
| Max. bar length | 3200 mm |
ACCESSORIES
| 2 pc. Collet chuck | |
| 1 Set Tool holder for turning tools | |
| 1 Set Tool holder for driven tools | |
| 1 Set Spare Parts for the machine (i.e. Mitsubishi Power modules, etc.) | |
| 1 Set Changing tubes |
GENERAL TECHNICAL DATA
| Total power requirement | 24 kVA |
| Machine dimensions (LxWxH) approx. | 3060 x 1460 x 2250 mm |
| Machine weight approx. | 4000 kg |
Remarks
| We described the specified product with the upmost attention. As this product is not manufactured by us, the mentioned data and description can deviate. Herewith, we point out that they are non-binding and ask you to check them during your inspection. |