General
| Project No: | 905595 |
| Quantity: | 1 pc. |
| Manufacturer: | DMG SAUER |
| Type: | HSC 20 linear |
| Control: | Siemens 840 D solutionline |
| Year of Manufacture: | 2020 |
| Condition: | Used Machine |
| Machine on approx. [h]: | 3.043 |
| Spindle on approx. [h]: | 1.453 |
Description
MILLING
| 5 Axis |
| Travel in X 200 mm |
| Travel in Y 220 mm |
| Travel in Z 280 mm |
| Max. rapid traverse in X/Y/Z 40/40/40 m/min |
| Linear drive X/Y/Z |
| Tool taper HSK E32 |
| Max. speed milling spindle 60000 1/min |
| Max. torque at 10-40/100% duty ratio 4,8/3,6 Nm |
| Tool magazine 60 stations |
| Max. tool diameter 50 mm |
| Max. tool length 200 mm |
| Chip-to-chip time <10s s |
| Swivel unit NC-controlled |
| Swivel range -15 bis +130 degree |
| Rotary table NC-controlled |
| Diameter rotary table 250 mm |
| Max. speed milling-turning table (milling/turning) 1500 1/min |
| Tailstock |
FURTHER EQUIPMENT
| IR-measuring probe |
| Fully enclosed work area |
| Light in working area |
| Mechanical oil-/emulsion mist extraction unit |
| Internal coolant supply |
| Flush gun |
| Coolant unit with paperband filter |
| High pressure pump 40 bar |
| Additional pallet handling with magazine pallets |
| Operation mode 4 |
| 3D quickSET |
| Electronic handwheel |
| Outside mounted cabinet cooler |
GENERAL TECHNICAL DATA
| Air supply 6 bar |
| Mains fuse 100-125 A |
| Total power requirement 50-70 kVA |
| Machine dimensions (LxWxH) approx. 1950x2050x2430 mm |
| Machine weight approx. 4500 kg |
Remarks
| We described the specified product with the upmost attention. As this product is not manufactured by us, the mentioned data and description can deviate. Herewith, we point out that they are non-binding and ask you to check them during your inspection. |