General
| Project No: | 905498 |
| Quantity: | 1 pc. |
| Manufacturer: | SW (Schwäbische Werkzeugmaschinen) |
| Type: | BA W06-22 |
| Control: | Siemens 840 D |
| Year of Manufacture: | 2006 |
| Condition: | Used Machine |
| Shifts approx.: | 2-3 shift |
Description
MILLING
| Travel in X 600 mm |
| Travel in Y 600 (875) mm |
| Travel in Z 500 mm |
| Max. rapid traverse in X/Y/Z 100/100/100 m/min |
| Max. acceleration in X/Y/Z 12/10/20 m/s2 |
| Feed force X/Y/Z 10000/10000/2×5000 N |
| Linear glass scales X/Y/Z/A(U)/C1(C2)/W1(W2) |
| Linear drive X/Y/Z |
| Tool taper HSK-A 63 |
| Max. speed milling spindle 17500 1/min |
| Max. power at 10-40/100% duty ratio 35/26 kW |
| Max. torque at 10-40/100% duty ratio 80/60 Nm |
| Spindle diameter in front bearing 80 mm |
| 2 pc. Horizontal milling spindle |
| Spindle distance 600 mm |
| Air-monitored tool clamping |
| Pneumatic tool taper cleaning in milling spindle |
| Chain-type tool magazine 2×72 stations |
| Max. tool diameter 80 mm |
| Max. tool diameter without adjacent tools 160 mm |
| Max. tool length 350 mm |
| Max. workpiece weight 10 kg |
| Pallet changer 2 fold |
| Max. workpiece weight per pallet 600 kg |
| 2 pc. Swivel unit for clamping bridge |
| Swivel unit NC-controlled |
| 4 pcs. Rotary table NC-controlled (5th axis) – 2 pcs. on each side |
| Bridge dimensions 1430 mm |
| 2 Clamping bridge supports |
| Hydraulic clamping 250 bar |
| 6 pcs. Additional clamping circuit |
FURTHER EQUIPMENT
| IR-measuring probe |
| Fully enclosed work area |
| Automatic sliding door for loading area |
| Light in working area |
| Oil-/emulsion mist extraction unit |
| Scraper-type chip conveyor |
| Discharge hight chip conveyor 1200 mm |
| Machine operates/operated with emulsion |
| Internal coolant supply |
| Coolant unit with paperband filter |
| High pressure pump 70 bar |
| Modem for remote diagnosis and TeleService |
| Tapping without compensation chuck |
| Additional control panel for tool management |
| Warning lamp |
GENERAL TECHNICAL DATA
| Air supply 7 bar |
| Operating voltage 3×400/50 V/Hz |
| Total power requirement 133 kVA |
| Transport dimensions of the machine (LxWxH) approx. 3680x5400x3250 mm |
| Space requirement of the whole equipement (LxWxH) approx. 4800x7500x3300 mm |
| Machine weight approx. 20000 kg |
Remarks
| We described the specified product as accurate as possible. As it is not a product manufactured by us, the mentioned data can deviate. Herewith, we point out that the mentioned data are are non-binding and ask you to check them during your inspection. |