Description
TURNING
| Max. turning diameter | 220 mm |
| Max. workpiece length | 614 mm |
| Max. Swing diameter over bed cover | 240 mm |
| Max. Clamping chuck diameter | 210 mm |
| Max. distance between both spindle noses | 800 mm |
| Max. speed main spindle | 4000 1/min |
| Max. power main spindle at 10-40/100% duty ratio | 35,5/23,5 kW |
| Max. torque main spindle at 10-40/100% duty ratio | 205/150 Nm |
| Spindle bore main spindle | 72,5/66 mm |
| Spindle diameter in front bearing main spindle | 110 mm |
| Spindle flange size main spindle | ASA 6 A2 |
| Axis at main spindle unit | C |
| Hollow clamping cylinder at main spindle | |
| Stop in main spindle | |
| Coolant through main spindle | |
| Max. speed opposed spindle | 4000 1/min |
| Max. power opposed spindle at 10-40/100% duty ratio | 35,5/23,5 kW |
| Max. torque opposed spindle at 10-40/100% duty ratio | 205/150 Nm |
| Spindle bore opposed spindle | 72,5/66 mm |
| Spindle diameter in front bearing opposed spindle | 110 mm |
| Spindle flange size opposed spindle | ASA 6 A2 |
| Axis at opposed spindle unit | X/Z/C |
| Travel in X/Y/Z opposed spindle unit | 240/-/580 mm |
| Coolant through main spindle | |
| Tailstock NC-controlled | 580 mm |
| Tailstock quill reception | CM 3 |
Upper turret
| No. of stations/driven | 12/12 |
| Tool reception in turret | 20x20/25x25 |
| Speed tool drive | 12000 1/min |
| Torque tool drive | 42/32 Nm |
| Axis in turret | X/Y/Z |
| Travel in X/Y/Z | 167,5/90/515 mm |
| Max. rapid traverse in X/Y/Z | 30/20/30 m/min |
| Max. acceleration in X/Y/Z | 1/1/1 g |
Lower turret
| No. of stations/driven | 12/12 |
| Tool reception in turret | 20x20/25x25 |
| Speed tool drive | 12000 1/min |
| Torque tool drive | 42/32 Nm |
| Axis in turret | X/Y/Z |
| Travel in X/Y/Z | 167,5/90/515 mm |
| Max. rapid traverse in X/Y/Z | 30/20/30 m/min |
| Max. acceleration in X/Y/Z | 1/1/1 g |
FURTHER EQUIPMENT
| Tool measurement | |
| Tool breakage monitoring | |
| Tool life time monitoring | |
| Fully enclosed work area | |
| Rotating disc window | |
| Light in working area | |
| Oil-/emulsion mist extraction unit | |
| Chip conveyor | |
| Coolant unit | |
| High pressure pump | 35/15/6 bar |
Automation
| Part infeed conveyor | |
| Part outfeed conveyor | |
| Internal gantry-type loading-/unloading unit | |
| Warning lamp |
ACCESSORIES
| 2 pc. Collet chuck (Hainbuch Axfix 65) | mm |
| 1 Set Tool holder for turning tools | |
| 1 Set Tool holder for driven tools |
GENERAL TECHNICAL DATA
| Total power requirement | 87 kVA |
| Machine dimensions (LxWxH) approx. | 2860x2377x2289 mm |
| Machine weight approx. | 11000 kg |
Remarks
| We described the specified product with the upmost attention. As this product is not manufactured by us, the mentioned data and description can deviate. Herewith, we point out that they are non-binding and ask you to check them during your inspection. |
